This is my first blog post on my new hardware, so it’s a kind of test to see if everything is working, and so far it does.
My old computer had a 30 Gig and a 40 Gig hard drive, and about 6 months ago I upgraded the 40 Gig one to 500 Gig. It was quite difficult to find one, as most of the hard drives being sold now are SATA, and I wanted an EIDE disk to match the other one. Eventually I found one, backed up all the data on the old drive using Acronis disk imaging software, installed it on the new drive, and everything still worked.
This time, however, was more ambitious.
The old computer was getting rickety. I dared not switch it off, because it might not restart. If the power went off, I’d have to sit pushing the power button for half an hour before it would run.
The CPU fan was also getting noisy, and it sounded rather ominous.
So that meant replacing the motherboard, and both hard drives (both now 500 Gig SATA). I’ll see if I can use the 500 Gig EIDE drive an an external housing as a backup USB drive – it’s only about 6 months old.
It took me a day to get this far — backing up the 30 Gigs of data on the G: drive took 9 hours, and nearly 2 hours to restore on the new drive. And the C: drive was the critical one, because that had the operating system (Windows XP) — would it work on the new drive? It did. Everything seems to be working fine.
The only problem is, Windows thinks there have been too many hardware changes, and wants to be revalidated. If that goes as smoothly as the rest of it, all will be well.
Oh, and my printer has a parallel cable, and the new hardware has no parallel port. But perhaps a USB cable will work, or I can nick a parallel card from the old one, if it fits the new motherboard.